RFID Timer Controller for 2 Washing Machines or Dryers
Perfect for B&Bs, residences, campsites, shared laundry rooms and multi-unit buildings
This professional RFID system allows you to activate two household appliances (washing machines, dryers or washer-dryers) using prepaid rechargeable RFID cards. Each use automatically deducts one credit from the card and activates the selected machine for the programmed time.
⚙️ How It Works
- The user places their RFID card near the reader.
- The LCD display shows the remaining credit stored on the card.
- 1 credit is automatically deducted (e.g., 1 credit = 1 hour of use).
- The user presses the corresponding backlit button to select which machine to activate.
- The system powers the selected machine for the programmed time (Phase + Neutral).
Additional time can be added at any moment—even while the cycle is running—by re-presenting the card and pressing the button again.
🧰 Technical Features
- ABS enclosure (IP56) – suitable for humid and semi-outdoor environments.
- Dimensions: 40 × 30 × 16 cm – approx. 3 kg.
- RFID reader 13.56 MHz, Mifare 1K – ISO 14443A compliant.
- 2 backlit push-buttons (one for each machine).
- 2 independent outputs with NO contacts for Phase + Neutral switching.
- Power supply: 230Vac.
- Load supported: up to 3500W per machine.
- LCD display: shows card credit and remaining credit.
- LED display: remaining time countdown for each machine.
- Programmable time: from 1 second to 99 hours per output.
- 10 rechargeable RFID cards included.
- Card programmer NOT included (code: RFIDPROG).
- Made in Italy – CE certified – English instructions included.
🔌 Compatibility with Washing Machines and Dryers
⚠️ Some domestic appliances specify in their manual a prohibition on using external timers or external control devices.
- This device does not modify the internal electronics of the appliance.
- It only controls the external power supply for a preset duration.
- Use is at the sole discretion of the customer.
- Recommended for professional-grade machines designed for external start commands or power activation.
TULLIO SERCI S.r.l. declines all responsibility for malfunctions or damage caused by use with appliances that do not comply with the manufacturer's specifications.
🛠️ Installation and Electrical Requirements
The electrical line must be protected by:
- Double-pole circuit breaker sized for the load.
- RCD (Residual Current Device) in accordance with safety standards.
- Correct grounding throughout the installation.
The RFID controller must be installed between the circuit breaker and the appliance being controlled. During maintenance, always disconnect the main switch.
📘 User Manual & Programming
The product includes a complete English manual explaining how to:
- program time and credit values
- configure the two outputs
- recharge RFID cards
- install the unit safely and correctly
RELATED PRODUCTS
