Coin-Operated Machine for Industrial Washers and Dryers
(Compatible with all models equipped with START contact – NO, voltage-free)
⚙️ Description and Operation
This coin-operated machine is designed to start industrial devices (such as washers or dryers) equipped with a normally open (NO) START contact.
Once the preset credit is reached, the machine closes the contact to start the cycle of the selected machine.
🟦 TANDEM System with Dual Output
The solution includes two independent electronic coin machines, each controlling a separate machine via a timed dry contact (no voltage present on the contact).
Each coin machine operates independently and is fully programmable.
🔧 Technical Features
Structure: pressed sheet metal, grey RAL7035
Dimensions: 30 x 30 x 20 cm – Weight: approx. 7 kg
Internal coin container with armored door and key lock
Wall mounting: expansion anchors included
2 multi-coin electronic machines: accept €0.10 / 0.20 / 0.50 / 1.00 / 2.00
2 timed NO contacts (voltage-free): maximum current 6A per output
LED displays (2): show credit and remaining time
Flexible programming: time and price adjustable from 1 second to 99 hours
Factory settings: €1 = 1 second (modifiable)
Power supply: 1 cable with Schuko plug for the entire system
Internal terminal block for device connections
CE Marking – Made in Italy – Instructions in Italian
Supplied ready to use
🔌 Compatibility and Important Notes
✅ Designed for professional or industrial machines with clean START contact control
❌ Not suitable for domestic washers and dryers without external control input
If a coin machine is to be used with domestic appliances, a different model is required that manages direct electrical power (ON/OFF) rather than only the Start contact.
☀️ Installation and Environmental Protection
✅ Can be installed outdoors, but must be protected from direct sunlight and rain (e.g., in a technical cabinet or under a roof).
⚠️ Warranty does not cover damage from weather exposure or incorrect installation.
In case of malfunction, photographic documentation of the installation will be required.
⚠️ Technical and Electrical Warnings
The coin machine does not provide change.
The electrical line must be protected by:
Bipolar circuit breaker
Differential switch
Mandatory grounding
The system must be installed between the bipolar switch and the machine.
During maintenance, the switch must be turned off.
The coin machine does not replace the main switch.
🛠️ Installation and Connection
Connections must be performed exclusively by a qualified technician, following the instructions provided and respecting:
Correct identification of Phase and Neutral
Connections to the machine’s NO control terminals
📘 Installation and Use Instructions
To ensure safe and correct operation, it is essential to:
Read the user manual carefully
Follow all applicable electrical safety regulations
📩 Technical Support and Customizations
For special configurations or technical advice, contact:
📧 info@gettoniere-shop.it
